How to bypass the laser sensors in 007 First Light

In typical James Bond fashion, players will enter the east wing hallway of the Webb Industries building, only to be locked out by tripping a grid of laser sensors. 007 First light. Thankfully, these aren't the kind of lasers that would shatter James' legs by stepping on them, but you'll need to disable them to unlock the door on the other side of the hallway and advance the mission. Here's a quick guide on how to bypass the laser sensors in the East Wing hallway. 007 First light.

related to

007 First Light: How to get the vent to open the door to the greenway (high ground).

High Ground 007 First Light is a challenge in the Nightfall chapter that requires James to take a vent to open a greenway on the executive second floor.

How to bypass the laser sensors in 007 First Light

Move Warped Furniture Bypass Laser Sensor 007 First Light

After James accidentally enters the laser sensor grid in the East Wing hallway during the Nightfall chapter 007 First lightA locking sequence will begin, locking all surrounding doors. Players must bypass the laser sensors in the hallway and lift the lockdown.

To do that, head left from the hallway, and you'll come up Some wrapped furniture throughout. Interact with it, and Greenway will help James move it out of the way. Once it's out of the way, move forward and enter the back vent that connects to the nearby offices.

Moving through the vents bypass laser sensor 007 first light

While crawling through the ventilation duct, You should first exit through the vent on the leftWhich will take you to Isola's office. Feel free to interact with various documents in the office, and walk out the front door when you're done.

Unlocking living room door bypass laser sensor 007 first light

Without stepping on visible laser sensors, look at the glass to the right, and you'll be able to Unlock the door to the living room by hacking it with Q-Watch. Once the door is unlocked, return to the ventilation ducts. Now you will need it Exit the vent to the leftWhich will take you to the other end of the East Wing hallway.

Laser sensor 007 bypassing the first light

Go inside the meeting room you just unlocked, and interact with the panel Request the service of a cleaning robot. This will open the main glass doors leading to the laser hallway, where you'll find a panel to disable the sensor protection.

Once you are done, This will remove the lock and bypass the sensors in 007 First light. Now you can either freely explore the area or move on to the next objective.